XJRider.com

Hi Guys,

I followed a fantastic write up on here to measure the valve clearances, the results are below. I have a few questions regarding the results and just wondered if anyone could confirm, before I go ahead and order the replacements

#1 IN
Measurement: 0.13
Shim: In spec not removed.
Adjustment shim needed: None

#2 IN
Measurement: 0.11
Shim: In spec not removed
Adjustment shim needed: None

#3 IN
Measurement: 0.06
Shim:292
Adjustment shim needed: 285

#4 IN
Measurement: 0.10
Shim: 282
Adjustment shim needed: 280

#1 EX
Measurement: 0.19
Shim: 290
Adjustment shim needed: 290

#2 EX
Measurement: 0.18
Shim: 270
Adjustment shim needed: 270

#3 EX
Measurement: 0.22
Shim: In spec not removed
Adjustment shim needed: None

#4 EX
Measurement: 0.18
Shim: 262
Adjustment shim needed: 265


Thanks guys for any advice you can give,

Jason