No spedo.
Posted: Fri Oct 04, 2013 8:12 pm
My spedo has decided to stop working and i can't for the lift of me find out why.
Plugged drill into cable and it spins freely and spedo registers speed.
Ive taken the front wheel off and checked the spedo drive but unfortunately i have no idea which part could have failed or how it failed.
Does anyone have an images/videos of what the spedo drive should look like when moved and what not?
Inside the drive (forgot if its in wheel or the part conected to cable) is a little disc with 2 flanges that spin freely that i can turn with a finger.
I have a lack of tools/centrestand/jacking ability so i decided to get some advice here first so when i do get the front off the floor i can check all of them.
Plugged drill into cable and it spins freely and spedo registers speed.
Ive taken the front wheel off and checked the spedo drive but unfortunately i have no idea which part could have failed or how it failed.
Does anyone have an images/videos of what the spedo drive should look like when moved and what not?
Inside the drive (forgot if its in wheel or the part conected to cable) is a little disc with 2 flanges that spin freely that i can turn with a finger.
I have a lack of tools/centrestand/jacking ability so i decided to get some advice here first so when i do get the front off the floor i can check all of them.