Broken mixture screw tip
Posted: Sun Nov 08, 2020 6:44 pm
I've been rebuilding my 93 xj600. I had it pretty much back up and running, took it on a few short rides then started experiencing idle and Rev issues below 2k.
Well after some inspection I found my mixture screw tip on carb body #1 broke off. I couldn't see it, tried shooting some carb cleaner down and put it back on the bike. No good. Barely getting to 100f on the exhaust pip so I'm guessing it's still stuck in the carb body.
How screwed am I here? Any tips on how to extract? I'm down to replace but I can't find just the 1 carb and don't really want to shell out for a set of 4
Any tips highly recommended
Thanks!
Well after some inspection I found my mixture screw tip on carb body #1 broke off. I couldn't see it, tried shooting some carb cleaner down and put it back on the bike. No good. Barely getting to 100f on the exhaust pip so I'm guessing it's still stuck in the carb body.
How screwed am I here? Any tips on how to extract? I'm down to replace but I can't find just the 1 carb and don't really want to shell out for a set of 4
Any tips highly recommended
Thanks!