This project has been going on since September 2015, but I never started a project thread. The project is really close to being "finished" (we all know these types of projects never finish), and I thought, better late than never.
I bought the bike really cheap (by Norwegian standards), and the bike was in a fairly good nick, consindering it had done 80k km.
Here's how it looked when I first bought it.
![Image](http://xjrider.com/chevereto/images/2016/06/26/11695887_10155912364175323_1839326551819286757_n.jpg)
![Image](http://xjrider.com/chevereto/images/2016/06/26/11951996_10156039308820323_7100128250220758062_n1.jpg)
And here's how it looked during building.
![Image](http://xjrider.com/chevereto/images/2016/05/28/Snapchat-7970738106815378985.jpg)
I bought a fiberglass seat from the UK. Had to shorten in a few centimeters, and bend in the rear frame a few millimeters to make it fit. As you can see I shortened the frame. Replaced also the rear shock with a Honda CBR600 shock, which is a bit longer. Looks much nicer when it's a bit raised in the back.
![Image](http://xjrider.com/chevereto/images/2016/04/27/rammea3022.jpg)
I got the frame welded by a very skilled, professional welder.
And here's how the bike looks like right now (the tank and seat are only placed on the bike on the picture, not fastened).
![Image](http://xjrider.com/chevereto/images/2016/06/26/IMG_20160623_183834964_HDR.jpg)
![Image](http://xjrider.com/chevereto/images/2016/06/27/IMG_20160623_184411925.jpg)
![Image](http://xjrider.com/chevereto/images/2016/06/27/IMG_20160623_184515557.jpg)