This is how it was when i bought it
I knew the wiring was buggered as soon as i took the headlight out.
So i decided to buy a new loom off ebay and start again, but i turned out that the loom i bought had a few breaks in the wires so i had to cut off the good bits and re splice them into my original loom.
[video]http://vid1154.photobucket.com/albums/p ... fuuzn2.mp4[/video]
Once i knew that the electrics were sorted i started with the strip down to get the frame and a few parts ready for powder coating.
You'll have to excuse the state of the garage.
I then purchased a yamaha fzr 600 front and rear wheel which now sit in the bike frame, but at the mo i have no pics to show this.
few parts removed and primed up
engine is out but not the easiest thing to do on your own.
Body panels removed ready for paint.
Rusty chrome blasted and re painted black
Mocked up clock brackets made for the new clocks.
And another ebay purchase to fit to the rear swingarm before it goes off for powder coating
And that is where im up to at the min stand by for more updated over the next few weeks.
Gav