Been studying the forums for ages, and finally came up against a brick wall!
The wiring loom up to the 11 pin relay at the rear of the bike has been destroyed - there is no connector, just wires attached directly to the pins. I've seen that only 10 wires are used, where connecter and relay have 11 - wiring on bike only has 10 wires.
I've got a replacement connector but wondering if anyone could help shed some light on which colour cable goes to the relevant relay pin?
Ive put pictures of the wiring from the bike, and replacement connecter up on the gallery and linked below - just want to make sure i wire it up correctly before trying to fire up the bike.
http://xjrider.com/chevereto/image/FHLR
http://xjrider.com/chevereto/image/FSMK
Any help is much appreciated.
Thanks
